HOW TO INSTALL OPENFILER FROM USB DRIVER
HOW TO INSTALL OPENFILER FROM USB SOFTWARE
HOW TO INSTALL OPENFILER FROM USB DOWNLOAD

Such is, for instance, SUSE Linux Enterprise Server 10. Some projects I looked at use Linux guests (in virtual machine) to simulate iSCSI using iSCSI server features built into some Linux flavours.

HOW TO INSTALL OPENFILER FROM USB SOFTWARE

We will use software to simulate hard drives and disk volumes. Reminder: we are in a virtualized environment so we do not need to run to a store and buy real hard drives. These iSCSI targets can be created in a variety of ways. It all stems down to having iSCSI targets (server) somewhere on your network.

If you are planning to experiment with Oracle RAC you will need a SAN (NAS). Link back: This guide is a part of the Virtual Oracle RAC project, the index to the whole project is here.

Installing Openfiler 2.99 On a 3Ware 9750-4i RAID.My 20TB Openfiler Cluster is Configured!.Not sure why the install wasn't as straight forward as it should be, but now that it's installed it seems to be working well.Дel. tags: how to, install, 3ware, lsi, raid, controller, 9750, 9750-4i, openfiler, 2.99 I then repeated the previous steps and installed Openfiler to the 10GB partiton. I went back in, re-created the RAID but this time I set up a 10GB boot partition. When you are creating your RAID in the 3Ware bios, there is an option to create a separate boot partition as a part of the RAID config. This is the final 'gotcha' I found with 3Ware and Openfiler. When I rebooted though, it wouldn't boot up.

HOW TO INSTALL OPENFILER FROM USB DRIVER

Openfiler read the disk at boot up, found the driver and I was able to get it installed successfully. Once I had the floppy I booted up the server to the installation CD, at the same time I plugged in the usb floppy drive with the driver floppy disk. I then had to write the image to floppy using a tool called Rawrite. Yes, as in 1.44MB floppy! WTF is that? No matter how hard we try, we just can't get rid of those damn floppies ( Thats what she said! - Corny, I know.).ДЄnyway, to get this bastard installed, I had to track down a floppy disk, and a usb floppy drive. The bad news is that the driver comes as a floppy image. The good news is the 2.3 driver works for 2.99 as well.

HOW TO INSTALL OPENFILER FROM USB DOWNLOAD

WTF? It turns out that LSI/3Ware made a driver available for Openfiler 2.3 though, which you can download here: ( Openfiler 9750 32bit and Openfiler 9750 64bit) Glib detected *** /sbin/loader: double free or corrupted. However when I select it, the Openfiler installation craps out with the below error: When I booted up Openfiler, it saw the RAID controller, but it didn't detect the right driver so it asked me to load a driver, or search for one manually I find the 3ware 9000 Storage Contoller Linux Driver (3w-9xxxx). Reading online, in forums, and in the Openfiler community it seemed that this card would be supported out of the box because the 9750 chipset's driver is built into Linux kernels 2.6.23 and newer which Openfiler uses. You see, I am using a 3Ware 9750-4i RAID controller card. Turns out there was a little bit of a pain in this process. So I finally got one of my SuperMicro storage chassis built out, and I decided to do the initial install of Openfiler 2.99 on it. It should have been done already, but I have been plagued with set backs from manufacturers, and retailers since I ordered this stuff, but I digress.

This article isn't going to be too much different because I am still very much involved in this project. SuperMicro servers, Openfiler SAN's and XenServer. I haven't been writing too much lately, and the stuff I have been writing about have pretty much consisted of three different things.

How to install openfiler from usb